FuelTech FT400 EFI SYSTEM

FEATURES

Not recommended for high performance V8 applications. 
Please refer to our FT500LITE, FT500, and FT600 ECU for this type of application.

• 4.3” color touchscreen TFT – non reflective
• Electronic throttle control (Drive-by-wire)
• Distributor type and crank trigger ignition control
• 6 ignition outputs to control wasted spark or coil on plug systems
• 24 channel internal datalogger (FuelTech USB-CAN Converter needed – sold separately)
• Idle speed control by timing,step motor or by solenoid
• Plug and Play connection to Racepak IQ3 dash *
• Fuel table tuning aid **
• Closed loop lambda control **
• Active traction control (FuelTech GearController needed – sold separately)

* Using integrated CAN port
**FuelTech WB-O2 Meter Nano or WB-O2 Datalogger needed – sold separately

Product intended for off road race-only, ground vehicle use only. FuelTech is not responsible for any misuse of these products. Check with your local authorities regarding highway laws in your area.

 

TECHNICAL DESCRIPTION

• Rotary and piston engine compatible (2-3 rotors, 1 to 12cyl)
• Ignition and fuel mapping directly on the ECU or through PC (Software FuelTech ECU Manager)*
• 13 input channels (IAT, ECT, oil and fuel pressure, O2 sensor, TPS, electronic pedal – 2 channels, electronic throttle, A/C, two-step, RPM and cam sensor)
• 2 injectors output that control up to 12 high impedance injectors
• 7 auxiliary outputs (fuel pump, fan, variable camshaft, A/C, etc.)
• Built-in MAP Sensor (87 psi)
• 5 internal memory files
• Boost control by RPM through N75 valve
• Progressive nitrous injection (wet/dry)
• Screen bright and buzzer Volume control
• Password protection
• Map backups on PC*
• Firmware update over the internet*
• Engine protection through 10 configurable alerts
• Time based rev limiter
• ECU Language according to your purchase region (no future language change is possible)
• Dimensions: 140mm x 80mm x 30mm

*FuelTech USB-CAN Converter needed – sold separately

CONTENTS OF PACKAGING

• 1 FT400 EFI System
• 1 Operation and installation guide
• 1 10ft FT400 unterminated main harness (optional)
• 1 10ft FT400 unterminated auxiliary harness (optional)
• 1 Nylon hose for MAP Sensor
• 1 Smart Clip Bracket & Hardware
• 1 promotional kit (including a pen, a keychain and a sticker kit)