Haltech Pro Plug-In for AP1 2000-2005 Honda S2000

Product Description
Features:
* Direct plug and play replacement of the OEM ECU, no re-wiring necessary.
* Uses the cars factory sensors
* Supports Honda's VTEC and VTC Control
* Supports Sequential Injection (peak and hold) and Direct fire ignition
* Windows 2000, xP, Vista, Windows 7 compatible software
* Real time programming, instant hesitation free adjustment while engine is running
* Fully user definable 32 - 32 mapping
* Tuning via Volumetric Efficiency (VE) or Injection time
* OBD II Code Storing & Malfunction Indicator Light (MIL) Control (Access through laptop only )
* Selectable onboard internal MAP sensor rated to 150kPa (up to 1.5 Bar or 22psi boost)
* Wideband "auto tuning" using user definable target AFR table
* USB and CAN Communication Port
Factory Inputs/Outputs: (dependent on make/model)
* 4/6 x Fuel Injector outputs
* 4/6 x Ignition outputs
* Tacho, Boost Control, AC Clutch Relay, Idle Control
* Knock Detection Sensor, MAP Sensor, Narrowband Oxygen sensor
* Coolant Temperature sensor, Vehicle Speed Sensor, AC Clutch Relay Idle Control
* Air Temperature sensor, Power Steering Input, 4WD Switch, Throttle Position Sensor
* Variable CAM Timing (VCT), VTEC, N-VCT ( Nissan Variable CAM Timing Control), MIVEC Control
* Thermo Fan, Check Engine Light, Fuel Pump
Expansion I/O:*
* 2 x Analogue Voltage inputs
* 2 x Analogue Temperature inputs
* 4 x Digital pulsed output
*Optional auxiliary harness required to be purchased Haltech Part # HT040003
Functions:
* Knock Control
* Long Term Fuel Trim
* VTEC on Injection / Ignition
* VTEC on CAM
* Closed Loop O2 Control
* Decel Cut
* Over Boost
* Rev Limiter
* Closed & Open Loop Boost Control
* Gear Setup
* Transient Throttle Enhance
Correction Tables: Fuel Ignition Boost:
* Cranking
* Air Temp Target Correction
* Coolant Temperature Correction
* Map Correction
* Zero Throttle Gear Correction
* Cylinder Trim
* TPS Correction
* Generic Correction 1*
* Generic Correction 2*
* Gear Correction
* Post Start
* Air Temp Duty Correction
* Post Start
Generic Correction tables have user definable axis
Miscellaneous:
* Data Logging: 448Kb of onboard data logging, Storage for approx 40 minutes at 10 logs per seconds, 6 channels of data
* Max 20 channels logging capability
* Tune can be password protected in software
* Rugged anodized aluminum casing
Physical Dimensions:
ECU Dimensions Length: 154-210mm
Width: 158mm Height: 42mm Weight: 680g (1.5 lb)
Transmission:
* Manual Only (Automatic not supported)
The Platinum Pro Plug-in Kit includes:
Pro Plug-in ECU, USB Cable, Programming Software CD, Quick Start Guide, Instruction Manual (on CD)